Since the day we ripped off the old tan vinyl coverings from the dashboard and entry wall, we have been welcomed into the bus by chewed-up metal and aging defrost system. Last week, we shared the new defrost system, and today we finally get to share how we covered it
After making the decision to completely replace the 57-year-old defrost system with an aftermarket system, it was time to begin the installation. There were quite a few pieces and parts to map out: hoses, adapters, pumps, valves, cables, vents, and more hoses. Of course, it was not a simple drop-in
It seems like dash areas are one of the last places bus converters address (if they ever do). We are certainly no exception there. Part of the reason was that we didn’t want to ding and scratch up a nice new finished area coming in and out of the
After making the second couch and the hinging arms last time, we moved onto making the tables and putting it all together. We also had to come up with a Plan B mid-project, because real-life does not always work like a SketchUp drawing. In the end, we made it work
After finishing the first couch base last time, we moved onto figuring out the hinging arms (which also become table legs). We followed the measurements from our Sketchup design plans to cut and weld together the different pieces that make up the arms. We also made our own hinges using
For the last few years, we have had this next project lingering in the back of our minds, waiting for inspiration to strike. What we didn’t know was how in the world we could actually make it work. What is it? A couch that is also a table that
It was finally time to install the propane system in the bus. We have had the water heater installed for almost 10 months, but with the hottest summer in Arizona history this year we were not in a hurry to hook it up. Many times during the summer, the water
The time had come to do a little maintenance on our Nissan Leaf battery. We slid our battery into the bay on October 22, 2017 - well over 3 years ago! I am happy to report that the performance of the battery and solar system has exceeded our expectations. That
Two years ago, we installed a Toyota Sienna seat in our bus for our passenger seat. At that time, we made a custom mounting bracket to fit the base from the previous seat. Well, the time finally came to replace the driver’s seat as well, but we desperately needed
After finishing the ceiling in the kitchen/living room and front cab, we were ready to tackle the walls. However, before we could begin planking the walls, we had to deal with all of the wires in our “wire chase” that runs the length of the bus on both sides
Today, we are sharing a quick project that took one “To-Do” off our mental checklist. The original bus wiring had all the battery systems were wired together. The batteries would drain rapidly only lasting about 3 or 4 days. We got in the habit of always unplugging the batteries ... until
When we decided to travel in a motorhome versus a truck and trailer, we knew that we would need to find the safest way for the kids to be seated. Of course, there would have to be seat belts. In addition, we have two children that are still in car
After finishing the ceiling in the kitchen and living room, it was time to finish off the ceiling of the front cab. Last year, we built upper cabinets in this area, which was one of the trickiest projects we have encountered. Thankfully, the cabinets eat up some of the major
